Concrete contractors and costs in Austin, TX (2026)

In short

A new 2-car concrete driveway in Austin typically costs $5,200–$8,400, or about $6–$15 per sq ft installed. Expansive clay soil makes a compacted base and rebar worth paying for.

Prices checked: Oct 2026

National cost guides

Methodology

Typical driveway

$5,200¹

2-car, 576 sq ft

Per sq ft installed

$6–$15²

4 in, broom finish

Driveway permit

$150–$300³

City of Austin

Photo by Etienne Girardet on Unsplash

Watch: what a good Austin driveway pour looks like

6:42 · loads on click

Photo by Mitchell Luo on Unsplash

Austin concrete prices by job

Job · unit

Low

Typical

High

Driveway, broom per sq ft

$7.50

$10

$13.50

Driveway, 2-car project

$3,500

$5,200

$8,600

Stamped patio per sq ft

$12

$16

$22

Plain patio per sq ft

$9.50

$13

Garage or shop slab per sq ft

$11

Sidewalk / walkway per sq ft

$10

$14

Resurfacing per sq ft

Crack repair project

$250

$600

$1,400

Old slab removal per sq ft

$4.50

Driveway approach (ROW) project

$1,800

$3,200

$5,000

What changes the price in Austin

Local conditions, each with its source.

Rebar on a compacted base holds up best on Austin clay

Photo by Michael Bader on Unsplash

Expansive clay soil⁴

Much of Travis County sits on clay that swells when wet and shrinks in drought. Ask for a compacted gravel base and rebar, not wire mesh.

Summer heat

Pros often pour at dawn from June to September so the concrete doesn't set too fast. Expect early start times, not higher prices.

Permits for approaches³

A new or widened driveway approach into the street right-of-way needs a City of Austin permit. Work on your own lot usually doesn't.

HOA rules

Many Austin-area HOAs regulate driveway width, color and stamped patterns. Get written approval before you sign.

License and law in Texas

Checked Oct 28, 2026

Contractor license

Texas has no statewide license for concrete or general contractors. Check the city registration and insurance instead.

Trades that need a state license

Electrical and HVAC work: TDLR. Plumbing: Texas State Board of Plumbing Examiners.

Before you pay

Get a written contract with scope, price and schedule, and ask for lien waivers from suppliers on large jobs.

Texas state guide

General information, not legal advice.

Questions Austin homeowners ask

How much does a concrete driveway cost in Austin?

Most 2-car driveways (about 576 sq ft) cost $5,200–$8,400 installed in 2026. Removing an old slab adds roughly $1,100–$2,600.

Do I need a permit for a driveway in Austin?

Work on your own lot usually doesn't. A new or wider approach into the street right-of-way does, through City of Austin Development Services.

How thick should my driveway be?

4 inches for cars. 5–6 inches if you park trucks, trailers or an RV.

Is stamped concrete worth it?

It costs about 60% more than broom finish and needs resealing every 2–3 years. Pavers cost more up front but repair more easily.

When is the best time to pour in Austin?

Spring and fall. Summer pours are fine when done early in the morning with proper curing.

How do I check a contractor here?

Texas doesn't license concrete contractors, so check insurance, city registration and reviews from verified jobs.

Sources and checks

31 Austin-area concrete quotes submitted after completed jobs, Jul–Oct 2026.

Ready-mix price sheets from 3 Austin suppliers, checked Oct 2026.

City of Austin Development Services, driveway and right-of-way permits, checked Oct 2026.

Natural Resources Conservation Service Web Soil Survey, Travis County, checked Oct 2026.

Texas Comptroller, local sales tax rate for Austin (8.25%), checked Oct 2026.

Concrete near Austin

Are you an Austin concrete contractor?

Claim your free listing. Homeowners on this page pick their own pros, so your lead is never shared with eight others.